Moisture Stabilizer Prosorb Panel

Moisture Stabilizer Prosorb Panel

PROSORB custom panel to stabilize relative humidity in painting frames and other flat display cases. Price calculation according to the desired dimensions.

Custom panels: up to 600 x 1150 mm, special shapes possible Thickness: 10 or 20 mm. Material: polypropylene honeycomb panel, polyester fleece, Marvelseal 360. Alternatively, polyester fleece on both sides.

Please contact us to receive a quote for this product.

PROSORB Conditioning

Prosorb Moisture Stabilizer in Custom Panel format to stabilize the relative humidity in paints and flat showcases.

The Prosorb Moisture Stabilizer is supplied pre-conditioned for the individual humidity level you need. It is very effective and offers a unique adsorption capacity within the 30 - 60% RH range, the range uses by most museums.

Depending on the climatic conditions that are drier or more humid than the desired humidity range, PRO SORB preconditioning will need to be adjusted at the upper or lower end of the desired RH range. PRO SORB is available in preconditioned form for 30, 35, 40, 45, 50, 55 or 60% RH.

The 10 mm thick panels are filled with approx. 3.5 kg PROSORB / m². Total weight approx. 5 - 5.5 kg / m² depending on conditioning.

The 20 mm thick panels are filled with approx. 7.5 kg PROSORB / m². Total weight approx. 10.5 - 12 kg / m² depending on conditioning.

The fleece laminated honeycomb panels were Oddy-tested in 2011 and are suitable for permanent use in museum showcases. The aluminum composite film Marvelseal is sealed without additional materials. The edges are reinforced with 3M # 425 soft aluminum tape, also Oddy tested.

Please contact us to receive a quote for this product.

No reviews

This website uses cookies so that you have the best user experience.

If you continue browsing you are giving your consent for the acceptance of the

mentioned cookies and the acceptance of our cookies policy.

Click on the link for more information.