Logiterm Isothermal Insulator for maritime container
Logiterm isothermal insulators are a type of insulator for standard containers by means of which sudden temperature changes can be avoided without having to use special containers or keeping the products at their proper temperature for their good preservation.
The 20' or 40' container reels serve to cover the container's walls and ceiling, but not the floor (it is usually made of wood and does not need isothermal insulation)
For the installation of the reel for 20' container you need 1 adhesive tape for isothermal insulation (double-sided adhesive) and for the reel for 40' container you need 2 adhesive tapes. You can buy them at Conservatis in related products.
Logiterm isothermal insulators are a system for standard containers. It is a flexible thermal insulator used to transport products sensitive to temperature variations by land, sea and air. In many cases, it avoids the need to use temperature controlled containers.
Logiterm, is composed of a polyethylene air bubble film and covered with 2 layers of pure aluminum.
The Logiterm isothermal insulator acts as an insulator against external temperatures and on the temperature changes during transport. It is resistant to compression, and due to its low thickness allows to maintain maximum capacity inside the container.
This system of isothermal insulators for standard containers, cannot guarantee certain minimum or maximum temperatures because the changes in temperature during transport depend on many factors. The factors vary with each shipment of merchandise.
At Conservatis we offer the Logiterm 20' kit for 20' containers, rolls 47 m long and 1.20 m high and also the Logiterm 40' kit for 40' containers, rolls 83 m long and 1.20 m high. They have a thermal conductivity of 0’040W / mºC.
Adhesive tape for isothermal insulation is required to properly place isothermal insulation in containers.