TEMP U05 temperature Data Logger
F0300308
€7.80
€6.45
tax excl.
Delivery 3 to 4 days
TEMP U05 single-use USB temperature logger is used to monitor and control the temperature and humidity of goods. The datalogger allows you to keep track of the quality and preservation of products that are particularly sensitive to variations in environmental conditions.
This product needs to be purchased in multiples of 10
The TEMP U05 single-use USB temperature monitor is suitable for use throughout the entire logistics process, transport and storage of goods.
The datalogger facilitates the detection and prevention of problems that may occur during the entire supply chain process. It allows recording the status of stored or transported products for up to 60 days. The temperature logger has a button to activate data recording, and once completed a report can be downloaded in PDF format.
These single use data logger has a LED alarm that shows if the temperature range <2°C / >8°C has been exceeded.
- Technical data
- Single use
- Port
- 69mm x 33mm x 5mm Communication interface: USB 2.0
- Software
- No need install any software
- Operating temperature
- -30 ºC to +60 ºC(-22 ºF to 140 ºF)
- Accuracy
- ±0.5ºC (-20 ºC +40 ºC); ±1 ºC, for other range
- Weight
- 12 g
- Dimensions
- 67 mm x 28 mm x 5,5 mm
- Memory Capacity
- Data storage: 10,000 records
- Report Generation
- Automatic PDF report generation
- Water Proof Level
- IP67 (with Seal-Bag)
- Shelf life / Battery
- 2 years / CR2032 button cell
- Recording interval
- 10 min (60 days)
- Alarm Type
- The red LED will flash every 10s, if the temperature has been out of the range
- Temperature alarm range
- Alarm temperature: below 2 ºC or above 8 ºC (35.6 ºF or above 46.4 ºF)
- Start Delay
- 30min