Dirty Electricity Meter
Use the EMI Greenwave broadband dirty electricity meter to detect and quantify dirty electricity of different frequencies (between 3 kHz and 10 MHz).
With the meter you can see the dirty electricity reducing effect of the Greenwave Filter has, since it is able to calculate the percentage of mV that have been reduced before and after the application.
Measure the dirty electricity in your home or office with the Greenwave Broadband EMI dirty electricity meter.
A product to find out how much dirty electricity is in the electrical circuit and to know if the dirty electricity in your home or office is higher than desired. Useful to observe the difference caused by the application of a filter and to help in its installation.
With the dirty electricity meter you can quantify the electrical pollution that can cause health problems such as fatigue, headaches, sleep disorders, depression, memory loss, ADHD symptoms, asthma and allergies or muscle and joint pain.
It measures a much wider frequency band than other meters that you can find inmarket (from 3 kHz to 10 MHz) and is compatible with 50/60 Hz electrical circuits with voltages from 100V to 240V.
Easy to use, you just need to connect it to a plug.
- Technical data
- DO NOT attempt to use the instrument to measure dirty electricity on circuits with voltage outside this range. This may damage the instrument. Attempting to connect the meter to non-standard jacks will damage the instrument.
Used to measure dirty electricity in circuits with single phase voltages between 100 and 240 volts (for example, 100 V, 110 V, 115 V, 120 V, 127 V, 220 V, 230 V and 240 V).
- 0.275 kg
- 12 × 7.5 × 4 cm