The TEMP U2 temperature recorder is easy to apply and very economical.
Simply activate the start of data recording using the ON button. Once the transport or storage time of your products is over, you can obtain a PDF report to know the environmental conditions to which the merchandise has been subjected.
This data logger helps you improve the transport and storage chain, preventing the mishandling of your products or making changes that are relevant to improve the handling, storage and transit process.
These are some of its technical specifications:
- Single use
- Register between 5 min (30 days) / 110 min (60 days) / 15 min (90 days), to be chosen by the user
- Accuracy: ± 0.5 ºC (-20 ºC +40 ºC)
- Data storage: 10,000 records
- The alarm can be set in the following ranges: <2 ° C or> 8 ° C (35.6 ° F or> 46.4 ° F)
- Start with 30 minute delay
- Works between the following temperatures: -30 ºC to +60 ºC (-22 ºF to 140 ºF)
- Dimensions: 69mm x 33mm x 5mm
- Communication interface: USB 2.0
- Technical data
- Single use
Standard Compliance: CE, EN12830, GSP - Port
- 69mm x 33mm x 5mm Communication interface: USB 2.0
- Software
- No need install any software
- Operating temperature
- -30 ºC to +60 ºC(-22 ºF to 140 ºF)
- Accuracy
- ±0.5ºC (-20 ºC +40 ºC); ±1 ºC, for other range
- Dimensions
- 69mm x 33mm x 5mm
- Storage requirements
- Recommend 20 to 60% RH, 10 to 50·C
- Memory Capacity
- Data storage: 10,000 records
- Start
- Start Delay: 30min
- Alarm
- The alarm can be set in the following ranges: below 2 ° C or above 8 ° C (35.6 ° F or> 46.4 ° F)
- Report Generation
- Report Type: PDF
- Interval
- Log Interval: 5 min (30 days) 10min (60 days) 15 min (90 days), optional to user’s decision
- Water Proof Level
- IP67